Home > ALL >

Chemicals Resistant Manual Small Siphon Pump

Chemicals Resistant Manual Small Siphon Pump


 
Alternative Views:



Model: TRCSIPHON

Description
 
Features





  • 7 Liter/Min Chemical Resistant Manual Siphon Pump
    Transferring liquid out of a drum or can be a pain! Safetly use this portable TERA PUMP TRCSIPHON
    Manual Siphon Pump to transfer or empty tanks, barrels, drums, carboys and IBCs

    The TERA PUMP TRCSIPHON is an affordable manual chemical transfer pump designed for quick and easy emptying of gas cans of various sizes. The TRCSIPHON eliminates the lifting of large, heavy, gas cans and spilling wasted fuel. Up and down operated flexible spring type bellows allow smooth operation and high powered discharge.


    Chemical Resistant
    Applicable Liquids
    Thinner, Toluene, Hydrochloric Acid 35%, Sulfuric Acid 35%, Nitric Acid 35%, Sulfuric Acid 35%, Acetic Acid 35%, Water-not for dinking water, Gasoline, Diesel, Chemical Insecticides,Alcoholic liquids

    Dimensions
    Suction Type: Manual Squeezing Pump
    Total Length: 21 inches
    Weight: 3oz
    Suction Tube Length: 15.3 inches


    Features
    Easy Manual Pump

    Manually operated by pumping the handle.
    Portable & Light weight
    Screw top to release siphon vaccum and stop suctioning.
    Simple discharge tube designed to be flexible
    Suction Tube is cut with an angle to lay flat against the bottom
    Various Uses
    Useful in the garage, basement, bathroom, shop and yard
    Easily empty containers, For small fuel can or Tanks



    How to Operate
    1.Insert suction pipe (non-flexible hose) into the container with liquid.
    2.Insert discharge hose (flexible hose) into the receiving container or fuel tank (ex. kerosene heater)
    3.Tighten the air vent cap by turning clockwise to close vent.
    4.Squeeze operation bulb a few times to start siphon action. Automatic siphon action will continue as long as fluid level in sending container is highter thatn the level in the conatiner that fluid is being transferred into.
    5.Before receiveing container is completel.y full, stop fluid flow by turning air vent cap counter clockwise. Gently lift discharge hose slightly to allow any remaining fuel to drain
    6.Remove suction piple from sending container. Insert discharge hose end into hose clamp to prevent fluid from dripping.
    7.Clean up any spilled fluids and dispose of cleaning materials outside the living area.
    8.Store siphon pump outdoors