Home > ALL >

TRDP15 - Heavy Duty High Speed Siphon Liquid Transfer Pump

TRDP15 - Heavy Duty High Speed Siphon Liquid Transfer Pump


 
Alternative Views:



Model: TRDP15

Features Downloads
 

done_all Compatible Liquids
Kerosene, Light Oils, Diesel Oils, Chemical Insecticides, toluene, light solvents, gasoline, water etc

closeNOT Compatible
Corrosive Chemicals

Description


  • 5 GPM Liquid Transfer Pump

  • Transferring liquid out of a gas can or drum can be a pain! Safely use this portable TERA PUMP TRDP15 LIquid Transfer Pump to transfer or empty tanks, barrels, drums, carboys and IBCs

  • The TERA PUMP TRDP15 is an affordable manual fuel transfer pump designed for quick and easy emptying of gas cans of various sizes. The TRDP15 eliminates the lifting of large, heavy, gas cans and spilling wasted fuel. Up and down operated flexible spring type bellows allow smooth operation and high powered discharge.

  • FEATURES

    • Manually operated liquid transfer pump
    • Portable, light weight, and heavy duty materials
    • High speed suctions power (5 GPM)
    • Button on top of pump to release siphon vacuum and stop suctioning
    • Easily empty containers
    • Unique bendable suction tube System
    • Useful in the garage, basement, bathroom, and yard

  • DESCRIPTION

    • Suction Type: Manual squeezing Pump
    • Delivery Volume: 5 Gallon/Min
    • Total Length: 24 inches
    • Discharge Tube Inner Diameter: 0.65 inches
    • Suction Tube Length: 16.5 Inches

  • How to Operate

  • 1. Insert suction pipe (non-flexible) into the sending container

  • 2. Insert discharge hose (flexible) into the receiving container or fuel tank (kerosene heater).

  • 3. Squeeze operation bulb a few times to start siphon action. Automatic siphon action will continue as long as fluid level in sending container is higher thank the level in the container that fluid is being transferred into.

  • 4. Before receiving container is completely full, stop fluid by pushing air vent cap and holding it down for a few seconds. Gently lift discharge hose slightly to allow any remaining fuel to drain.

  • 5. Remove suction pipe from sending container. Insert discharge hose end tinto hose clamp to prevent fluid from dripping.

  • 6.Clean up any spilled fluids and dispose of cleaning materials outside the living area.

  • 7.Store siphon pump outdoors