 |
 |
 |
 |
|
 |
|
Description
-
FUEL TRANSFER PUMP - • Battery Loading Slot: Simple Slide off mechanism
- • Battery Operated: Uses only 2 AA batteries (NOT included)
- • Dimensions: 21 x 4.5 x 1.8 Inches
- • Weight: 3 LBS
-
-
SPECIFICATION - • Suction Type: Battery Powered Liquid Transfer Pump
- • Useful in the garage, basement, bathroom, shop or yard.
- • 2.6 Gallons per Minute. Increased suctioning power with impeller head<
- • Applicable Liquids: Any Non-Corrosive Liquids such as gas, diesel and water (NOT for Drinking Water), etc...
-
-
- HOW TO OPERATE
- 1. Immerse the suction end of the pump into the liquid (ex. Gas Can)
- 2. Insert the tube into a container to receive the liquid
- 3. Turn the pump on. Caution: Do Not over fill the container. Avoid pumping liquid to a container higher than the pump's motor housing
- 4. When finished, keep the pump upright and lift the handle above the pump mechanism to drain any liquid back into the original container. Do Not lay pump down until all liquid has been drained from the tube and pump
- 5. Run water through the pump after using it with any other liquid. This will rinse the interior and extend the life of the pump
-
 Operates with Two (2) "AA" Batteries, Not included! -
 Do not use with drinking water, hot water, acetone, benzen, creosol, ethyl, phenol, methyl ethyl, concentrated caustic soda liquid, nitric acid, hydrochloric acid, sulfuric acid, thinners, solvents, etc.
|
|
|
|
|
|
|