Toggle search bar

  Home > ALL >

TRHA03 - 2AA Liquid Transfer Pump with Auto-Stop and Buzzer - 2.4 GPM

TRHA03 - 2AA Liquid Transfer Pump with Auto-Stop and Buzzer - 2.4 GPM

Alternative Views:

  • Flow Rate of 2.4 Gallons per Minute

  • Intake Tube Length: 15.5 in

  • Discharge Hose Length of 18 in + 5.5 in Nozzle

  • Auto-Stop mechanism

  • Requires 2 "AA" Batteries (Not Included)

Model: TRHA03


done_all Compatible Liquids
Any non-corrosive such as gas, diesel, kerosene, water (not drinking water), etc.

closeNOT Compatible
Drinking water, hot water, acetone, benzen, creosol, ethyl, phenol, methyl ethyl, concentrated caustic soda liquid, nitric acid, hydrochloric acid, sulfuric acid, thinners, solvents, etc.


  • 2.4 GPM Fuel Transfer Pump

  • Transferring liquid out of a drum can be a pain! Safely use this portable TERA PUMP TRHA03 Manual Siphon Pump to transfer or empty tanks, barrels, drums, carboys and IBCs

  • The TERA PUMP TRHA03 is an affordable manual chemical transfer pump designed for quick and easy emptying of gas cans of various sizes. The TRHA03 eliminates the lifting of large, heavy, gas cans and spilling wasted fuel. Up and down operated flexible spring type bellows allow smooth operation and high powered discharge.

    • Battery Loading Slot: Simple Slide off mechanism
    • Simple Power Switch: Switch to on and you're ready to go
    • Auto-Buzzer: Sounds when pump Automatically stops
    • Auto-Stop Sensor Mechanism: Pump warns when it is at capacity, Protecting from leaks and liquid overflow

    • Suction Type: Battery Powered Liquid Transfer Pump
    • Battery Operated: Uses only 2 AA Alkaline Batteries (NOT Included)
    • Dimensions: 21.5 x 4.5 x 2 Inches
    • Weight: 4 LBS
    • Delivery Volume: 10 Quarts / Min or 2.4 Gallons per Minute. Increased suctioning power with impeller head
    • Application Liquids: Any Non-Corrosive Liquids such as gas, diesel and water (NOT for Drinking Water), etc...

    • 1. Immerse the suction end of the pump into the liquid (ex. Gas Can)
    • 2. Insert the tube into a container to receive the liquid
    • 3. Turn the pump on. Caution: Do Not over fill the container. Avoid pumping liquid to a container higher than the pump's motor housing
    • 4. When finished, keep the pump upright and lift the handle above the pump mechanism to drain any liquid back into the original container. Do Not lay pump down until all liquid has been drained from the tube and pump.
    • 5. Run water through the pump after using it with any other liquid. This will rinse the interior and extends the life of the pump.