Home > ALL >

TRHD03 - 2D Liquid Transfer Pump with Auto-stop and Buzzer

TRHD03 - 2D Liquid Transfer Pump with Auto-stop and Buzzer

Alternative Views:

Model: TRHD03


done_all Compatible Liquids
Any non-corrosive such as gas, diesel, kerosene, water (not drinking water), etc.

closeNOT Compatible
Acetone, benzen, creosol, ethyl, phenol, methyl ethyl, concentrated caustic soda liquid, nitric acid, hydrochloric acid, sulfuric acid, thinners, solvents, ec.


  • 2.5 Gallons/Min Fuel Transfer Pump
  • Transferring liquid out of a drum can be a pain! Safely use this portable TERA PUMP TRHD03 Manual Siphon Pump to transfer or empty tanks, barrels, drums, carboys and IBCs

  • The TERA PUMP TRHD03 is an affordable manual chemical transfer pump designed for quick and easy emptying of gas cans of various sizes. The TRHD03 eliminates the lifting of large, heavy, gas cans and spilling wasted fuel. Up and down operated flexible spring type bellows allow smooth operation and high powered discharge.

    • Suction Type: Battery Powered Liquids Transfer Pump
    • Material: P.P, P.E., Acetal, Make in Korea
    • Weight & Total Dimensions: 12.8 ounces, 25 x 4.5 x 2.5 inches
    • Battery Operated Uses only 2 "D" batteries (Not Included)
    • Application Liquids: Any non-corrosive liquids such as gas, diesel, and water (not for drinking)...etc

    • Simple Power Switch Switch to on and you're ready to go very easy to control
    • 2.5 Gallons/Min Suctioning Increased suctioning power with impeller head
    • Auto-Stop Sensor Mechanism protects from leaks and liquid overflow
    • Auto-Buzzer sounds when pump auto-stops
    • Dimensions: 25 x 4.5 x 2 Inches
    • Useful in the Garage, Basement, Bathroom, Shop and the yard.
    • The TRHD03 has an unbeatable design and superior mechanisms that you can't find with other pumps. It is by far the most reliable battery-powered pump you can count on every single time you use it!

    • 1. Immerse the suction end of the pump into the liquid (ex. Gas Can)
    • 2. Insert the tube into a container to receive the liquid
    • 3. Turn the pump on. Caution: Do Not over fill the container. Avoid pumping liquid to a container higher than the pump's motor housing
    • 4. When finished, keep the pump upright and lift the handle above the pump mechanism to drain any liquid back into the original container. Do Not lay pump down until all liquid has been drained from the tube and pump.
    • 5. Run water through the pump after using it with any other liquid. This will rinse the interior and extend the life of the pump.